Lamborghini Huracan/Audi R8
The T1 Complete Fuel Solution for the second-generation Audi R8 and Lamborghini Huracan comes with all the necessary parts required for install, but there a...
Thu, 8 Aug, 2024 at 11:31 AM
There are two versions to this harness. Both contain all necessary wires to allow full AWD control by the Slave Motec ecu. The harness with the I/O option...
Tue, 9 Jan, 2024 at 2:43 PM
***Installation of this drag pack and the modifications necessary to run the setup is recommended to be done by a qualified technician.*** Depending on ...
Tue, 24 Jan, 2023 at 3:37 PM
The Belak wheels equipped with titanium hardware need to be checked periodically for bolt torque as the lower torque spec compared to steel hardware on both...
Wed, 5 Apr, 2023 at 10:05 AM
***Installation of this drag pack and the modifications necessary to run the setup is recommended to be done by a qualified technician.*** Depending on ...
Thu, 8 Jun, 2023 at 11:26 AM
Wiring in your T1 Motec M1 Autoshift Harness is covered in the MoTeC documentation for the ECU kit. This install guide is attached below and the instruction...
Wed, 1 Nov, 2023 at 2:52 PM
*Installation of this kit should only be performed by a qualified technician and before any work is performed the battery power should be disconnected compl...
Thu, 2 Nov, 2023 at 8:36 AM
The T1 M1 GPS Harness comes terminated and ready to pair with your MoTeC ECU, with corresponding pin locations labeled on the four harness wires. If yours n...
Wed, 1 May, 2024 at 9:02 AM
The T1 M1 Keypad Harness comes terminated and ready to pair with your MoTeC ECU. The pin out for the Master ECU Adapter Box is as follows: Red - Breakou...
Wed, 1 May, 2024 at 9:00 AM
The T1 V10 Crankcase and Evap Kit is a fairly universal kit that can be adapted to work with a variety of aftermarket turbo kits and intake manifolds, on ei...
Wed, 5 Jun, 2024 at 11:00 AM