T1 Product Instructions
Wiring for the T1 Dual Pole Hall Effect Cam Sensor is as follows. The 4 pin DTM connector has the pin locations numbered on the back side of the connect...
Wed, 2 Sep, 2015 at 2:18 PM
Below are the M1 configuration files you can import using M1 Tune 1.4. If you need instruction on how to do this with other packages or earlier versions...
Mon, 7 Nov, 2016 at 11:19 AM
The below images show what needs to be set in the MoTeC M84, M400, M600, M800, or M880 for the T1 Cam Trigger on a B series engine.
Mon, 7 Nov, 2016 at 11:15 AM
This sensor is a 1/6 NPT fitment, this requires thread sealant to seal.
The glass bead tip can be exposed to fuel with no problems, this opens up m...
Thu, 11 Feb, 2016 at 4:33 PM