The T1 01.01.04 line kit is designed to be installed on a stock intake manifold or AMS billet intake, to be used in conjunction with the T1 01.01.03 In Tank Fuel System. Installation will be the same for both the second generation Audi R8 or Lamborghini Huracan. As is the case with any fuel system related work, all work should be performed by a qualified mechanic on a cool engine.
Filter inlet check valve assembly, note this is a previous design. The current design does not use the AN coupler and the check valve mounts directly to the filter:
Filter to Bank 1 Port Rail. Note, between the filter inlet line and the outlet line being secured, the filter is securely placed without the need for a bracket or tie:
Bank 2 Port Rail to FPR:
FPR to OEM Feed:
The 48" -04AN FPR reference line will be routed under the intake manifold, and will pick up from the circled OEM vacuum line on the intake manifold:
There are a number of OEM components connected to this line after it ends a couple inches off the intake, all of these will be deleted and the supplied 5/16 barb to -04AN fitting will be fitted. While not pictured, the line should be secured with the supplied fuel line clamp on the provided fitting, and reuse the stock spring clamp on the intake manifold:
11/1/2024 Amendment:
The 17.5" line which returns fuel to the DI feed system will mate with the line highlighted in green below (where the yellow component is stock). The yellow component and red hose assembly will be deleted entirely:
